Ride-on All-in-One Electric Road Sweeper-Scrubber
The XS16 is a large-capacity ride-on all-in-one electric road sweeper-scrubber designed for large-area outdoor cleaning. It combines sweeping, dust suppression, water washing and wastewater recovery in one electric vehicle, helping reduce the need for multiple cleaning machines and manual cleaning operations.
With a 2300 mm sweeping width, 1100 mm washing width, 1600 L waste hopper and 900 L water tank, the XS16 is designed for demanding cleaning routes such as industrial parks, factory roads, logistics areas, municipal roads, parking areas and large commercial properties.
Powered by a 72V 300Ah lithium battery and 72V 7500W AC drive motor, the machine provides electric operation without the need for conventional fuel power.
Main Product Specifications
| Item | Specification |
|---|---|
| Product Name | XS16 Electric Road Sweeper-Scrubber |
| Operator Capacity | 1 person |
| Overall Dimensions | 4700 × 1440 × 2160 mm |
| Cabin Dimensions | 2030 × 1350 × 1350 mm |
| Track Width | 1090 mm |
| Wheelbase | 2120 mm |
| Ground Clearance | 180 mm |
| Operating Weight | 1960 kg |
| Maximum Driving Speed | ≥28 km/h |
| Working Speed | ≥6 km/h |
| Minimum Turning Radius | 4 m |
| Front Brush Diameter | 600 mm |
| Middle Brush Diameter | 400 mm |
| Maximum Gradeability | ≤15° |
| Working Time | 3–7 hours |
| Water Tank | 900 L |
| Waste Hopper | 1600 L |
| Sweeping Width | 2300 mm |
| Washing Width | 1100 mm |
| Hopper Dumping Angle | 42° |
| Battery | 72V 300Ah Lithium Battery |
| Drive Motor | 72V 7500W AC Motor |
| Controller | 72V 7500W AC Controller |
| Charger | 220V Built-in Intelligent Charger |
| Charging Time | 6–8 hours |
2300 mm Wide Sweeping for Large Areas
The XS16 provides a 2300 mm maximum sweeping width, allowing the operator to cover a wide cleaning path during each pass.
This configuration is particularly suitable for:
-
Industrial parks
-
Factory roads
-
Logistics centers
-
Large warehouses and yards
-
Parking areas
-
Commercial complexes
-
Municipal roads
-
Construction and industrial sites
-
Large outdoor facilities
For large cleaning areas, a wide sweeping path can reduce the number of passes required.
For example, if a site has a long straight road or a large open yard, the operator can maintain a working speed of approximately 6 km/h or above, depending on actual working conditions, while using the wide brush system to cover a large area.
The actual cleaning output will depend on road conditions, obstacles, turning frequency, dust load and operating method.
Sweeping and Washing in One Machine
One of the key advantages of this configuration is that the XS16 is not limited to dry sweeping.
It combines:
Sweeping + Dust Suppression + Washing + Water Recovery
The machine provides a 2300 mm sweeping width and 1100 mm washing width, allowing operators to select the appropriate cleaning function according to the site.
For dusty outdoor roads, the water spray system can help suppress airborne dust during sweeping.
For areas requiring deeper cleaning, the washing function can be used to remove dirt and residue from the road surface.
This makes the machine suitable for applications where a conventional sweeper alone may not provide sufficient cleaning.
1600 L Waste Hopper for High-Volume Cleaning
The machine is equipped with a 1600 L waste hopper, providing substantial capacity for collecting dust, leaves, debris and other road waste.
The large hopper is especially useful for:
-
Industrial areas
-
Factory campuses
-
Large parking lots
-
Logistics parks
-
Municipal cleaning
-
Large outdoor commercial areas
The hopper has a 42° dumping angle, helping operators discharge collected waste at the designated disposal point.
For buyers managing large cleaning routes, hopper capacity is important because frequent unloading can increase non-cleaning time.
A larger hopper can allow the operator to complete a longer cleaning route before unloading, depending on the type and volume of debris collected.
900 L Water Tank for Washing and Dust Control
The XS16 uses a 900 L water tank for washing and dust suppression.
This large-capacity water system is designed for extended outdoor cleaning operations.
The rear spraying system can distribute water onto the working surface during operation, helping control dust and supporting washing operations.
The machine is also equipped with a 72V 5.5 kW electric high-pressure pump, with a 7.5 kW high-pressure pump available as an option.
This provides additional flexibility for buyers who require stronger washing performance.
72V 300Ah Lithium Battery
The standard power configuration uses a:
72V 300Ah Lithium Battery
The electric drive system includes a:
72V 7500W AC Motor
and:
72V 7500W AC Controller
The machine also uses a 220V built-in intelligent charger, with a charging time of approximately 6–8 hours.
The stated working time is 3–7 hours, depending on operating conditions and machine configuration.
For buyers planning daily cleaning schedules, the actual working time should be evaluated together with:
-
Cleaning load
-
Driving distance
-
Sweeping speed
-
Washing frequency
-
Brush operation
-
Water usage
-
Battery condition
This is more useful than evaluating battery capacity alone.
Enclosed Cab for Outdoor Cleaning
The XS16 uses an enclosed steel-frame cabin with glass doors.
The cabin configuration includes:
-
Electric windshield wiper
-
Electronic display
-
Adjustable driver's seat
-
Rear-view camera
-
Wide-view rear-view mirrors
-
LED headlights
-
LED side lighting
-
Turn signals
-
Rear lights
-
Warning lights
-
LED roof lighting
This enclosed configuration provides a more comfortable operating environment for outdoor cleaning work.
For sites where the machine may operate in different weather conditions, an enclosed cabin can also provide additional protection for the operator compared with an open ride-on sweeper.
Electric Power Steering and Heavy-Duty Chassis
The XS16 uses electric power-assisted worm-gear steering to reduce steering effort during operation.
The chassis is built with a welded carbon-steel frame.
The suspension system includes:
-
Load-bearing steering axle
-
Leaf-spring front suspension
-
Rear leaf-spring damping system
-
Fully floating rear axle
-
Hydraulic drum brake
-
Independent front and rear dual-circuit braking
The machine uses 175-70-13 tires and provides 180 mm ground clearance.
With a minimum turning radius of approximately 4 m, the vehicle is designed for large-area road cleaning while retaining the maneuverability required for industrial and commercial sites.
Dust Suppression and High-Pressure Washing
The XS16 provides more than conventional dry sweeping.
Its integrated cleaning system can support:
Dry Sweeping
Suitable for collecting:
-
Dust
-
Leaves
-
Small debris
-
Road dirt
-
Industrial waste
Water Dust Suppression
Water spraying helps reduce dust generated during sweeping operations.
Road Washing
The washing system can be used for areas requiring additional surface cleaning.
High-Pressure Cleaning
The standard 5.5 kW high-pressure pump can be upgraded to a 7.5 kW pump when stronger washing performance is required.
This makes the machine suitable for buyers looking for a multifunctional electric road cleaning vehicle rather than a basic sweeper.
Typical Applications
The XS16 can be used in a wide range of outdoor cleaning environments.
Industrial Parks
Large industrial parks often have long internal roads, loading areas and vehicle routes.
The 2300 mm sweeping width and 1600 L hopper are suitable for regular large-area cleaning.
Factory Campuses
Factories can use the machine to clean:
-
Internal roads
-
Parking areas
-
Loading zones
-
Employee parking areas
-
Outdoor production areas
Logistics Centers
Logistics facilities often generate dust and debris from frequent vehicle and forklift movement.
The combination of sweeping and washing functions allows operators to handle both dry debris and surface dirt.
Parking Lots
Large parking areas benefit from a wide cleaning path and large waste hopper because the operator can cover large open surfaces efficiently.
Municipal and Commercial Roads
The enclosed cabin, electric drive system, water spraying system and large-capacity hopper make the XS16 suitable for various road-cleaning applications.
Why Choose an All-in-One Electric Sweeper-Scrubber?
For large sites, using separate machines for sweeping and washing can increase equipment investment, storage requirements and operator requirements.
The XS16 combines several cleaning functions into one vehicle:
Sweeping → Dust Suppression → Washing → Water Recovery
This can simplify the equipment configuration for facilities that need more than basic dry sweeping.
The machine also uses electric drive technology, making it suitable for organizations looking to introduce electric cleaning equipment into their outdoor maintenance operations.
Current commercial products show that electric ride-on sweepers are increasingly available in large-format configurations, including machines with approximately 2300 mm sweeping widths and large water or hopper capacities.
Main Product Advantages
1. 2300 mm Wide Sweeping
Large cleaning width helps reduce repeated passes on open roads and yards.
2. 1600 L Waste Hopper
Large debris capacity reduces the frequency of unloading during long cleaning routes.
3. 900 L Water Tank
Large water capacity supports washing and dust suppression operations.
4. All-in-One Cleaning
Sweeping, dust suppression and washing functions are integrated into one vehicle.
5. 72V 300Ah Lithium Battery
The electric power system is designed for extended commercial cleaning operations.
6. 7500W AC Drive Motor
The AC drive system provides the power required for a large ride-on cleaning vehicle.
7. Enclosed Operator Cabin
The enclosed steel cabin includes glass doors, electric wipers, lighting and a reversing camera.
8. Optional High-Pressure Pump
The standard 5.5 kW high-pressure pump can be upgraded to a 7.5 kW configuration.
9. Heavy-Duty Construction
The welded carbon-steel chassis, reinforced hopper and heavy-duty suspension system are designed for demanding outdoor applications.
10. Customizable Appearance
The standard body color is white, with customized colors available according to project requirements.
Request a Quote for the XS16 Electric Road Sweeper-Scrubber
If you are sourcing an electric road sweeper, ride-on sweeper or multifunctional sweeper-scrubber for a large industrial or commercial site, the XS16 can be configured according to your cleaning requirements.
When requesting a quotation, provide:
-
Cleaning area
-
Road or floor surface
-
Daily working hours
-
Required sweeping width
-
Expected debris volume
-
Washing requirements
-
Operating environment
-
Destination country
-
Required quantity
Our team can then confirm the suitable configuration, battery option, high-pressure pump configuration, packaging and shipping requirements.
Contact us for the XS16 electric road sweeper-scrubber quotation and full technical specification.







