VL-X500A Electric Ride-On Floor Scrubber
The VL-X500A Electric Ride-On Floor Scrubber is a compact and efficient ride-on floor cleaning machine designed for commercial, industrial, and large-area hard floor cleaning. With a 500 mm working width and a working efficiency of up to 3,600 m²/h, it combines scrubbing, washing, and wastewater recovery in a single operation.
Powered by a 24V DC battery system, the VL-X500A features independent brush, suction, and driving motors. Its 550W brush motor, 600W suction motor, and 700W driving motor provide balanced cleaning and driving performance while maintaining a compact machine size.
Efficient 500 mm Scrubbing System
The VL-X500A has a 500 mm working width and a brush speed of 180 rpm, providing consistent contact between the brush and the floor surface.
With a rated working efficiency of up to 3,600 m²/h, the machine can cover large floor areas more efficiently than manual cleaning methods. It is suitable for regular maintenance cleaning as well as routine cleaning of commercial and industrial facilities.
830 mm Water Recovery Width
The machine is equipped with an 830 mm suction squeegee width and a 600W suction motor for effective wastewater recovery after scrubbing.
The wide suction system helps collect used cleaning water from the floor, leaving the cleaned surface with less residual water and helping improve cleaning results.
80L Clean Water Tank and 100L Recovery Tank
The VL-X500A features an 80L clean water tank and a 100L recovery water tank. The large tank capacities reduce the frequency of refilling and wastewater disposal during extended cleaning operations.
The separate clean-water and recovery-water systems allow the machine to continuously apply fresh cleaning solution while collecting used water into the recovery tank.
Electric Ride-On Operation
Unlike a walk-behind floor scrubber, the VL-X500A uses a ride-on operating configuration, allowing the operator to sit on the machine while controlling its driving and cleaning functions.
The adjustable driving speed ranges from 0 to 6 km/h, allowing the operator to select a suitable speed according to floor conditions and cleaning requirements.
The 700W driving motor provides controlled movement, while the machine supports a maximum climbing capability of 15%, making it suitable for facilities with moderate slopes and changes in floor level.
3–5 Hours of Continuous Operation
The VL-X500A is powered by a battery pack consisting of 2 × DC12V 100Ah batteries. Depending on operating conditions, floor conditions, and cleaning settings, the machine can provide approximately 3–5 hours of continuous operation.
This operating time makes the machine suitable for extended cleaning schedules in warehouses, workshops, supermarkets, shopping centers, commercial buildings, and other large facilities.
Low-Noise Cleaning Operation
With a sound level of ≤60 dB(A), the VL-X500A is designed for relatively quiet operation compared with many conventional industrial cleaning machines.
Its low-noise performance makes it suitable for environments where cleaning needs to be performed while normal business or facility operations continue.
Compact and Practical Design
Despite its ride-on configuration and large-capacity water tanks, the VL-X500A maintains a relatively compact footprint. Its overall dimensions are approximately 1,440 × 830 × 1,170 mm, with a machine weight of 153 kg.
The compact design helps the machine operate in a variety of indoor environments while providing the productivity advantages of a ride-on floor scrubber.
Key Specifications
| Parameter | Specification |
|---|---|
| Model | VL-X500A |
| Rated Voltage | DC24V |
| Working Efficiency | 3,600 m²/h |
| Working Width | 500 mm |
| Suction Squeegee Width | 830 mm |
| Brush Speed | 180 rpm |
| Brush Motor Power | 550 W |
| Suction Motor Power | 600 W |
| Driving Motor Power | 700 W |
| Driving Speed | 0–6 km/h |
| Maximum Climbing Capability | 15% |
| Clean Water Tank | 80 L |
| Recovery Water Tank | 100 L |
| Noise Level | ≤60 dB(A) |
| Battery Pack | 2 × DC12V 100Ah |
| Continuous Operating Time | 3–5 h |
| Machine Dimensions | 1,440 × 830 × 1,170 mm |
| Machine Weight | 153 kg |
Typical Applications
The VL-X500A Electric Ride-On Floor Scrubber is suitable for cleaning hard floor surfaces in a wide range of commercial and industrial environments, including:
-
Warehouses and logistics centers
-
Manufacturing workshops
-
Supermarkets and retail stores
-
Shopping centers
-
Hotels and commercial buildings
-
Schools and public facilities
-
Parking areas
-
Distribution centers
-
Large indoor facilities
Why Choose the VL-X500A?
The VL-X500A combines a 500 mm working width, 3,600 m²/h working efficiency, large-capacity 80L/100L water tanks, and 3–5 hours of continuous operation in a compact ride-on design.
For distributors, cleaning equipment suppliers, facility management companies, and commercial cleaning service providers, it provides a practical solution for customers looking for an electric ride-on floor scrubber for regular large-area floor cleaning.
