VL-X860 Electric Ride-On Floor Scrubber

The VL-X860 Electric Ride-On Floor Scrubber is a high-efficiency floor cleaning machine designed for large commercial and industrial floor areas. With an 860 mm working width and a working efficiency of up to 4,800 m²/h, it is designed to help operators clean large hard-floor surfaces efficiently while reducing manual cleaning labor.

The VL-X860 combines scrubbing, washing, and wastewater recovery in a single operation. It features two 550W brush motors, a 600W suction motor, and a powerful 1,200W driving motor. Its ride-on configuration allows the operator to control the machine while seated, making it suitable for extended cleaning operations in large facilities.

Wide 860 mm Working Width

The VL-X860 provides an 860 mm working width with a brush speed of 180 rpm. The wide cleaning path allows the machine to cover more floor area with each pass and reduces the number of passes required when cleaning large facilities.

With a working efficiency of up to 4,800 m²/h, the machine is suitable for warehouses, factories, logistics centers, supermarkets, shopping centers, and other large-area applications.

The scrubbing system uses two 550W brush motors, providing a combined brush power of 1,100W for consistent cleaning performance across the working width.

1,080 mm Water Recovery Width

The machine is equipped with a 1,080 mm suction squeegee and a 600W suction motor for effective wastewater recovery.

The wide suction system collects used cleaning water after the scrubbing process and helps reduce residual water on the floor. This allows the machine to perform scrubbing and water recovery in one continuous operation.

Large 120L Clean Water Tank

The VL-X860 features a 120L clean water tank and a 135L recovery water tank. The large tank capacities help reduce the frequency of water refilling and wastewater disposal during extended cleaning operations.

The separate clean-water and recovery-water systems allow fresh cleaning solution to be supplied during operation while wastewater is collected in the recovery tank.

Powerful Electric Ride-On System

The VL-X860 uses a 24V DC electrical system and is equipped with a 1,200W driving motor. Its driving speed can be adjusted from 0 to 6 km/h, allowing the operator to select an appropriate speed according to floor conditions and cleaning requirements.

The machine supports a maximum climbing capability of 15%, making it suitable for facilities with moderate slopes and changes in floor level.

The ride-on configuration allows the operator to sit on the machine while controlling its movement and cleaning functions, making it suitable for large facilities where long operating distances are required.

3–5 Hours of Continuous Operation

The VL-X860 is powered by a battery pack consisting of 2 × DC24V 100Ah batteries. Depending on floor conditions, cleaning settings, driving speed, and operating conditions, the machine can provide approximately 3–5 hours of continuous operating time.

This extended operating time makes the VL-X860 suitable for daily cleaning schedules in large commercial and industrial facilities.

Low-Noise Operation

The VL-X860 has a sound level of ≤60 dB(A). Its relatively low operating noise makes it suitable for environments where cleaning needs to be performed while normal activities continue.

It can be used in supermarkets, shopping centers, warehouses, hotels, commercial buildings, and other facilities where noise control is important.

Large-Capacity Design for Large Floor Areas

With overall dimensions of approximately 1,600 × 1,200 × 1,250 mm and a machine weight of 195 kg, the VL-X860 is designed for large-area cleaning applications.

Its combination of an 860 mm working width, high working efficiency, large water tank capacity, and powerful driving system provides a practical solution for customers who need to clean extensive hard-floor surfaces on a regular basis.

Key Specifications

Typical Applications

The VL-X860 Electric Ride-On Floor Scrubber is suitable for hard-floor cleaning in:

• Warehouses and logistics centers

• Manufacturing plants and industrial workshops

• Supermarkets and retail stores

• Shopping centers and commercial buildings

• Hotels and public facilities

• Distribution centers

• Parking areas

• Schools and institutional buildings

• Large indoor facilities

Suitable for Commercial and Industrial Cleaning

The VL-X860 is designed for customers looking for an 860 mm electric ride-on floor scrubber for high-efficiency large-area floor cleaning. Its wide working path, 4,800 m²/h working efficiency, 120L clean water tank, 135L recovery tank, and 3–5 hour operating time make it suitable for professional cleaning applications.

It can serve as a practical equipment option for cleaning equipment distributors, commercial cleaning companies, facility management providers, warehouses, factories, and other organizations responsible for maintaining large hard-floor areas.